Description

600mm diameter polypropylene inspection chamber for adoptable and non-adoptable applications. Compliant with Sewers for Adoption 7th edition [SfA7].

Choice of twelve bases for equal pipe connections.

For use directly with 150mm, 225mm and 300mm UltraRib system.

600mm diameter shaft may be cut to length to achieve required invert down to a maximum of 3 metres.

Applications

• For above ground access and maintenance inspection of buried pipework down to 3 metres deep
• For loading applications:
• B125 (12.5 tonnes) *
• D400 (40 tonnes) *

* With cover & frame supported by concrete plinth

Key Dimensions

• Invert depth of base:
• 646mm [for 150mm system]
• 705mm [for 225mm and 300mm systems]
• External shaft diameter: 683mm
• Shaft length: 3m
• Maximum installation depth: 3m

Key Features & Benefits

• Fast, easy installation: no wet trades
• Lightweight: no lifting equipment required
• Reinforced base plate to withstand groundwater pressure
• Shaft can be cut to required length
• All inlets and outlet sockets allow ≤7.5˚ movement in all directions

Compliance

Range 600 chambers comply with the following standards and regulations

• BS EN 13598-2: 2009
• SfA7 Typical Chamber Detail – Type 3: (Non-entry. Maximum depth from cover level to soffit of pipe: 3m)
• Building Regulations – Part H1: Shallow and/or Deep